User Guide

9231 Insert X 2.doc

12/30/02

CARPET LINER CARE AND USE INSTRUCTIONS

Your new 3D

carpet liners are custom molded to fit your vehicle. The liners are made to take the

place of your factory floor mats. For the correct fit, it is necessary to remove the factory floor mats

before installing your new carpet liners. However, do not remove the factory-installed carpeting.

Your liners are made from a unique combination of a lightweight thermoplastic foam and a high

quality automotive grade carpet that is extremely tough and durable. To clean your carpet liners,

vacuum first to remove loose debris and then use a damp sponge to spot clean. If you wish to use a

commercial cleaner, cleaners such as Resolve®, Woolite®, Capture® or similar products are

suggested. Read and follow the care and use instructions provided with these products. Spot removal

is most effective when the soiled area is treated promptly. Do not use solvent-based cleaners or

cleaners containing bleach as these may discolor your carpet.

Your 3D® carpet liners come with a lifetime warranty against tearing and cracking. For warranty

information or to see other products we have available for your vehicle, please see our web site,

http://www.huskyliners.com.

ALIGNMENT VIEW SHOWING PLACEMENT OF YOUR CHEVROLET/GMC

AND CADILLAC TRUCK & SPORT UTILITY FRONT 3D CARPET FLOOR LINERS

PASSENGER’S

SIDE LINER

DRIVER’S

SIDE LINER

PART NUMBERS MOLDED ON BACK SIDE OF LINERS

PAGE 1
CARPET LINER CARE AND USE INSTRUCTIONS Your new 3D ® carpet liners are custom molded to fit your vehicle. The liners are made to take the place of your factory floor mats. For the correct fit, it is necessary to remove the factory floor mats before installing your new carpet liners. However, do not remove the factory-installed carpeting. Your liners are made from a unique combination of a lightweight thermoplastic foam and a high quality automotive grade carpet that is extremely tough and durable.
PAGE 2
CARPET LINER INSTALLATION INSTRUCTIONS Your new 3D® Carpet Liners are designed to be held firmly in place with a Velcro® anchoring system. You will find that each of your front liners come with two Velcro® “hook” patches applied to the underneath surface of the liners. In the hardware bag included in the shipping container you will find 4 anchor screws with the “loop” portion of the Velcro® applied.