User Guide

8250.DOC

Rev: 0

02/01/01

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your

factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor

liner. However, do not remove the factory-installed carpeting.

Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest

way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409

or Glass Plus

work well. Use of

Armor All

, Son-of-a-Gun

or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA

TUNDRA CENTER HUMP LINER

NOTE: IF YOUR VEHICLE HAS A MANUAL TRANSMISSION, YOU MUST REMOVE THE TREAD PLATED MATERIAL

FROM AREA “1” SHOWN ABOVE. IF IT HAS A MANUAL SHIFT TRANSFER CASE, TRIM OUT THE TREAD PLATED

MATERIAL FROM AREA “2” SHOWN ABOVE. PULL THE SHIFTER BOOT(S) UP THROUGH THE CUT-OUT. A UTILITY

KNIFE OR HEAVY SCISSORS WORK WELL FOR TRIMMING.

PAGE 1
THANK YOU FOR SELECTING A HUSKY FLOOR LINER FROM WINFIELD CONSUMER PRODUCTS CARE AND USE INSTRUCTIONS Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor liner. However, do not remove the factory-installed carpeting. Your liner is made from an engineering resin that is lightweight and extremely tough and durable.