Installation Manual

53341
5334_Installation Instructions_R2
HUSKY FLOOR LINER RETAINING CLIP INSTALLATION INSTRUCTIONS
YOUR NEW LINER SET INCLUDES OUR NEW FLOOR LINER RETAINING CLIP SYSTEM. THIS
RETAINING CLIP GIVES MOVEMENT RESTRAINT WHILE KEEPING SPILLS AND DEBRIS TRAPPED
INSIDE THE LINERS. TO INSTALL THE HUSKY® LINER RETAINING CLIP ON THE PASSENGER SIDE
LINER, SIMPLY FOLLOW THE INSTRUCTIONS BELOW:
1) Pre fit your new X-act Contour floor liner in your vehicle (Image 1).
2) Insert the screw-in carpet retention screw into the bottom of the X-act Contour liner (Image 2).
3) Press down on the liner to pre-mark the carpet screw into the carpet (Image 3).
4) Screw the carpet screw into the carpet with a flat blade screwdriver (Image 4).
5) Press the X-act Contour liner over the top of the carpet screw post (Image 3).
IF YOU HAVE ANY QUESTIONS REGARDING THE INSTALLATION OF YOUR HUSKY® LINER RETAINING CLIPS,
JUST GIVE US A CALL MONDAY THROUGH FRIDAY FROM 8:00 AM – 5:00 PM CENTRAL TIME AT 800-344-8759 OR
E-MAIL US AT: [e-mail].
Image 1.
Image 2.
Image 3.
Image 4.