User Guide

2144 Front_Back.doc
05/26/06
#2144 TRIMMING PHOTOS
A UTILITY KNIFE WORKS WELL FOR TRIMMING. USE CAUTION WHEN HANDLING SHARP OJBECTS.
LOCATIONS 1 & 2. TRIM LINER ALONG BOTH SIDES
USING INSIDE EDGE OF BAND AS A GUIDE. SPLIT
IN CENTER ALONG RAISED LINE. LEAVE
“TONGUE” ATTACHED TO EACH END. TUCK
TONGUE INTO RELIEF AREA.
LOCATIONS 3 & 4. TRIM LINER USING RAISED
LINES AS GUIDE. REMOVE RECTANGULAR AREA
COMP LETE L Y TO AL L OW ACC ESS TO
ATTACHMENT BAR.
LOCATIONS 5 & 6. TRIM LINER ALONG THREE
SIDES USING RAISED LINE AS A GUIDE. DO NOT
TRIM EDGE CLOSEST TO REAR OF VEHICLE,
INSTEAD LEAVE “TONGUE” ATTACHED TO EACH
END. TUCK TONGUE UNDER SEAT ATTACHMENT
BARS. TONGUE WILL KEEP SEAT FROM CATCHING
ON EDGE OF LINER WHEN REMOVED.
LOCATIONS 7 & 8. TRIM LINER ALONG THREE
SIDES USING RAISED LINE AS A GUIDE. DO NOT
TRIM EDGE CLOSEST TO REAR OF VEHICLE,
INSTEAD LEAVE “TONGUE” ATTACHED TO EACH
END. TUCK TONGUE UNDER SEAT ATTACHMENT
BARS. TONGUE WILL KEEP SEAT FROM CATCHING
ON EDGE OF LINER WHEN REMOVED.
WITH THE ABOVE TRIMMING COMPLETED, YOUR THIRD ROW SEATS CAN BE MOUNTED ON TOP OF
YOUR CARGO LINER. TAKE CARE TO MAKE SURE THIRD ROW SEATS ARE SECURELY
LOCKED/FASTENED INTO PLACE BEFORE OPERATING VEHICLE. IF YOU HAVE ANY INSTALLATION
QUESTIONS, PLEASE CALL US AT 800-344-8759.
CARGO LINER PART #2144 IS DESIGNED TO COVER THE REAR 5 FOOT OF SUBURBAN’S/YUKON XL’S
WITH AN ALLOWANCE FOR FACTORY THIRD ROW SEATS. IF YOU WANT A CARGO LINER TO FIT BEHIND
THE THIRD ROW OF SEATS, YOU NEED HUSKY LINER PART #2143.