User Guide

CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front
floor liners are custom molded to fit your Hyundai Santa Fe 6-passenger & 7-passenger models. The liners are
made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor
mats before installing your new floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work
well. Use of Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR HYUNDAI SANTA FE
FRONT FLOOR LINERS (6-PASSENGER/7-PASSENGER MODEL)
TO EASE INSTALLATION OF YOUR NEW SANTA FE FRONT FLOOR LINERS, FIRST SLIDE BOTH
FRONT ROW SEATS ALL THE WAY BACK SO AS TO EXPOSE THE MAXIMUM AMOUNT OF THE
FLOOR PAN. AS YOU INSTALL THE LINERS, NOTE THAT BOTH LINERS ARE DESIGNED TO
ATTACH TO THE FACTORY MAT RETAINING HOOKS. BEFORE OPERATING YOUR VEHICLE,
MAKE SURE THE LINER IS SECURELY POSITIONED ON THE FACTORY MAT HOOKS. ONCE
LINERS ARE SECURELY IN PLACE, REPOSITION THE FRONT SEATS AS DESIRED.
LEFT OR DRIVER’S SIDE
RIGHT OR PASSENGER’S SIDE
1386 Installation Instructions 11/26/2014