Owners manual

09291 2 SIDED.docx

Rev: 0

PART #09291--FORD F150 SUPER CAB INSTALLATION INSTRUCTIONS

Congratulations on your purchase of the Husky Gear Box. The Gear Box is designed to fit under the rear seat of your truck

or SUV. The Gear Box gives you a place to store loose items and clutter and ultimately help keep your vehicle organized.

It’s designed to fit your vehicle with or without your Husky Liners in place and only takes a few minutes to install.

PACKAGE CONTENTS

Gear Box – Part No: 09291 (1)

Divider (1)

Safety Strap with Strap Lock (2)

Installation Instructions (1)

INSTRUCTIONS

1) Open and remove the Gear Box from the shipping box and protective plastic bag.

2) Lift the rear seats into their upright position (see Figure 1).

3) Position Gear Box in vehicle as shown below (see Figure 2).

Figure 1 Figure 2

PAGE 1
® PART #09291--FORD F150 SUPER CAB INSTALLATION INSTRUCTIONS Congratulations on your purchase of the Husky Gear Box. The Gear Box is designed to fit under the rear seat of your truck or SUV. The Gear Box gives you a place to store loose items and clutter and ultimately help keep your vehicle organized. It’s designed to fit your vehicle with or without your Husky Liners in place and only takes a few minutes to install.
PAGE 2
4) Loop safety straps around seat bracket cross bars and through the slots in the wall of the Gear Box (see Figure 3). Figure 3 Figure 4 Figure 5 5) With Gear Box in place, fasten lock and pull firmly on the strap to make sure the strap and the strap lock have been properly fastened (Figures 3). 6) Install the divider and you are ready to organize (see Figure 4 & 5). If you are storing long items it may be necessary to remove the divider.