Owners manual

HushMat
15032 W. 117
th
Street, Olathe, Kansas 66062
P(913) 599-2600 Email: [e-mail]
www.HushMat.com
Starting at one straight edge peel back the white release paper and press the
sheet onto the straight edge of the Headliner. *** Be careful not to stick the
adhesive side of the Silencer Megabond to itself – If this happens you will need
to cut around this area and patch the Silencer ***
Peel back the release paper completely from the sheet and work around the
outer edges of the headliner applying finger/hand pressure to the foam surface.
Secure the headliner back in place and reinstall all hardware and electrical
connections from the headliner and place the panel back onto the roof of the
vehicle. Test each device to ensure function before securing the headliner.
You now have a headliner that will not flex and vibrate. You also have a
headliner that has reduced over 70% of the radiant heat transfer through the
vehicle roof! Cool, Quiet and Comfortable – The HushMat way!
2005 Pontiac G5 illustration for Modified BEST application –
Customer choose to place ¼” Silencer Megabond directly on top of
HushMat Ultra – This still provides over 50% reduction in radiant
heat transfer.