Data Sheet

https://husarion.com/ [e-mail]
- Current balancing: 300 mAh / cell
- Number of supported cell NiCd / NiMH 1 ~ 15 cells
- Number of supported target Li-Po/Fe/Ion: 1 ~ 6 target
- Supported batteries Pb: 2 ~ 20V
- Weight (without cable and AC/DC adapter): 195 g
- Built-in charger memory: max. 5 packages
- Cycle feature packages
- Four programming buttons
- Built-in socket - T-deans
Capabilities:
- Discharging function
- Support LiPo / LiFe
- Fast charge function and storage charge mode
- Auto limit current
- Programmable limits of capacity
- Charging time limits
- Continuous monitoring of current input voltage on built-in display
- Save and load your own settings
Warnings
- Do not leave the charger unattended during operation.
- Do not connect charger or power adapter to power supply if you notice relevant
mechanical damage or defect. If you are not sure if you can continue to use the charger
kit, contact support.
- Avoid dust, moisture, excessive heating or direct sunlight and vibrations. These factors
may affect the charging process and cause malfunction or even serious damage of
charger or charged batteries.
- The allowed input voltage for charger is 11…18V. Too high voltage can cause damage,
too low voltage can cause malfunction or unpredictable behavior.
- Don’t put the charger close to flammable items or material.
Support
In case of any questions, please contact support at [e-mail] or ask a question on
our community forum: https://community.husarion.com/
Revision: 1.0
Date: 10.07.2018