User Guide

DISMOUNTING AND MOUNTING THE ENGINE

DISMOUNTING THE ENGINE

– Thoroughly clean the motorcycle and jack up on a

sturdy work stand.

– Remove the seat.

– Unscrew the air filter (1).

–Close both fuel taps and disconnect the fuel hoses

– Unscrew both lateral bolts (2) on the spoiler.

NOTE: Hold the retaining sleeve on the radiator

shield with pliers if it turns at the same time.

– Remove the tank with the spoilers.

–Disconnect the ground and positive cable.

– Loosen the hose clamp connecting the water pump

(3), remove the hose and drain the cooling liquid in a

suitable vessel.

– Loosen the hose clamps on the cylinder head (4) and

the radiator (5) and dismount both radiator hoses

together with the overflow hose (6).

–Dismount the engine vent hose (7).

– Remove the three nuts (8) from the radiator mounting

and pull the radiator out of the right side of the frame.