User Manual

www.P yleUSA.com

1. Speedometer: Display the current speed of the HURES36 Foldable Electric Scooter, as well as to display error codes.

2. Modes: Three modes available. "ECO" for Energy saving mode (smooth acceleration, suitable for beginners), "D" for

Standard mode and "S" for Sport mode (powerful, only recommended for skilled riders).

3. Pedestrian mode: Makes pushing the Electric Scooter easier.

4. Wireless BT: The icon indicates that the Electric Scooter has been successfully connected to the mobile device.

5. Error: The wrench icon indicates that the Electric Scooter has detected an error.

6. Battery Level: The battery power is indicated by 5 bars, each representing approximately 20% of a full battery.

7. Power Button: Press the button to turn the Electric Scooter on; and press and hold the button for 3 seconds to turn

the Electric Scooter o. When the Electric Scooter is on, press the button to turn the headlight on/o, and double

press to switch between modes.

Assembling Your Foldable Electric Scooter

1. Unfold the handlebar stem and

fasten it. Then unfold the kickstand

to support the Foldable Electric

Scooter.

Headlight

toward front

2. Firmly connect the wires inside the

handle and the stem. Slide the handle

onto the stem. Be aware of the

correct orientation.

3. Install six screws (two on each side)

with the included hex wrench.