HURVBTR30 Standing Vibration Fitness Machine Vibrating Platform Exercise & Workout Trainer
Before using, please read this USER MANUAL carefully, and pay special attention to the safety precaution to ensure proper operation and use. Please keep this USER MANUAL for further reference. CONTENTS Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Product Name and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Controller Name and Functions . .
Product Name and Functions Warning: Unauthorized dismantle, disassembly or renovation is not allowed to prevent electrical shock or any malfunctions. Please contact manufacturer or local dealer immediately if there is any service work needed. 1. Name and Components Case Base Platform Stop using the Product under below conditions, then power off and remove the plug from power supply • Water or other liquid is accidentally splashed onto the Product or controller.
Controller Name and Functions Using Method Start/Stop: Insert the power plug, switch ON power, then press the button to start the product. In the operation of the machine,press this button to stop working. Time - : Time decrease: the default working time is 10 minutes, divided into 10 levels, press this button to decrease time. Speed + : Speed increase: Manual 1 -20. Press this button to increase the speed when the machine is operating.
Moving Method Storage and Maintenance HANDLE Surface Cleaning Before cleaning, ensure the power switch is turned off, and the attaching plug is pulled out of the socket The rubber pedal and covers can be cleaned with a wet cloth containing detergent, and the detergent should be removed with a cloth Notice Do not clean the Product with corrosive detergent such as benzene or thinner, as it may cause fading, corrosion or crack on the Product. Do not splash water into the Product to avoid short circuit.
HURVBTR30 Common Problems & Solutions S/N Problems 1 3 4 5 Solutions The plug is not in place Insert the plug The power switch is off Turn switch on, the indicator The fuse is burnt Replace with a new fuse of the same model Normal sound generated by the motor or from the abrasion between mechanical units No additional treatment is required Operate the controller, but the Product has no action The electricity of batteries is worn out Replace batteries The controller is too far away from th
