Owner's Manual

3. Turn the dial clockwise to the RUN position to run

the station (only the desig-

nated station will water, then the

controller will return to auto-

matic mode with no change to the

previously set program). Also see One - Touch Manual Start and

Advance.

One - Touch Manual Start and Advance

You can also activate all stations to water without using the dial.

1. Hold down the button for 2 seconds.

2. This feature automatically defaults to program A. You can select

PROGRAMMING THE CONTROLLER

program B or C by pressing the button.

3. The station number will be ashing. Press the button to scroll

through the stations and use the or button to adjust station

run times. (If no buttons are pressed for a few seconds during

step 2 or 3, the controller will automatically begin watering).

4. Press the button scroll to the station you wish to begin with.

Aer a 2 - second pause, the program will begin. At any time

during the manual cycle, you can use the or buttons to navi-

gate from station to station manually.

MANUAL-ONE STATION