Operation Manual

CURRENT TIME/DAY
SUSUMOMO TUTU WEWE THTH FRFR SASA
17
PROGRAMMING THE CONTROLLER ...................................................................................
The EC Controller is easy to program. The easy to understand dial
design allows you to step through the process of programming and
activate manual watering with a twist of the wrist.
The EC display shows time and day when the controller is idle. The
display changes when the dial is rotated to indicate the specific
programming information to enter. When programming, the flashing
portion of the display can be changed by pressing the
or
buttons. To change something that is not flashing, press the button
until the desired field is flashing.
Three programs A, B and C each with the ability to have four daily
start times, permit plants with different watering requirements to
be separated on different day schedules. Multiple start times permit
morning, afternoon, and evening watering, perfect for the estab
-
lishment of new lawns and thirsty annual flowers. Simply designate
the days of the week you want to water. The EC makes it easy.
NOTE: A basic programming rule is that whatever symbol
or character is flashing will be the item programmed.
For instance, if the hour is flashing when setting the
time, the hour can be changed or programmed. For illus-
tration purposes, flashing characters are in GRAY type.
Setting the Date and Time
1. Turn the dial to the CURRENT
TIME/DAY position.
2. Hours will be flashing. Press
the or button to change
the hour shown on the display.
Press the to proceed to set-
ting the minutes.
3. Minutes will be flashing. Use
the
or button to change
the minutes shown on the dis-
play. Press the to proceed
to select AM, PM, or 24 hour
time.
4. The time will be displayed, and
an arrow will be flashing on
AM. Press the
and but-
tons to select AM, PM, or 24
hour. Press the to proceed
to setting the day of the week.
5. The MO (for Monday) will be
flashing. Press the and
to select the day of the week
corresponding to the day.
The time and day have now been
set. You can turn the dial to
AUTOMATIC to display the
current time.
* Note: For -E models of EC controllers, days of the week
are indicated by numbers 1 through 7.