Quick Start Guide

4 hunter.direct/ACC2help
Important Connections and Tips




Important Connections and Tips
FACEPACK
“Facepack” is a Hunter term for the enclosed, removable
control panel and display assembly. It contains the brain and
memory of the controller.
REVERSING THE FACEPACK
The ACC2 facepack and controls can be reversed in the door
frame, so they can be operated with the door open while
looking at the modules and wiring.
1. Pull the facepack away from the face frame.
2. The facepack is held in place by a magnet.
3. Pass the facepack through face frame.
4. Slide the facepack into the backside of the face frame as
shown.
5. Tilt the facepack into position, it will click into place and be
held securely by the magnet. Tuck the ribbon cable slack
into the provided pocket.
When the facepack detects that it is reversed, it will
automatically go to the Diagnostics, Module Info display. It
is possible to navigate to any other screen from this display,
including programming and manual operations.
The controller will water automatically with the
facepack in either position.