Quick Start Guide
26 hunter.direct/ACC2help
USER MANAGEMENT
This allows a password to be created for the controller.
Users will be required to enter the correct PIN (personal
identication number) before operating the controller. If a
single PIN is entered at the top, it is required for all users, and
provides the same level of access to all.
Check the box for Enable User Management to create one or
more PINs. Once it is checked, only an Admin level user who is
successfully logged in may uncheck this box.
It is also possible to dene dierent users, and individual PINs.
If passwords are enabled, and the password is lost
or forgotten, you will be locked out of the controller.
There are two levels of authorization, Admin and Crew.
Crew level access allows manual operations and the ability to
view programming.
Only Admins may modify programming and other settings.
User log-ins are tracked in the Controller Log.
To add a user, press the so key for Add User. You may then
enter the user’s name with the keyboard that appears. For
each user, select the Type (Admin or Crew), and create a
unique PIN for that person.
It is also possible for an Admin to delete users with the Delete
User so key.
Users will be automatically logged o aer 30 minutes of
inactivity.
NETWORKING
If the internal Wi-Fi or LAN modules are installed, Networking
will display the network settings of these devices.
Wi-Fi Setup: This so key lets you specify either direct or
central communications. Direct connections from a smart
mobile device will allow remote control, text entry, and ow
reporting within the range of the mobile device.
Network: This option is not currently enabled.
Settings Menu