Quick Start Guide

24 hunter.direct/ACC2help
Devices Menu
Devices allows setup of common external devices that the
controller can use. The functions in the Devices menu are
covered in more detail in other sections.
P/MV OPERATION
Set the Style, Normally Closed or Normally Open, for the
Pump/Master Valve outputs.
Pumps should always be set to Normally Closed to prevent
damage.
The P/MV Delay sets how long the P/MV will remain active if a
station pauses, such as during the delay between stations.
FLOW SENSORS
Flow Sensor setup is covered in detail in the Basic
Programming, Sensors, and Flow Sensors section
on page 20.
SOLAR SYNC
Solar Sync setup is covered in detail in the Basic
Programming, Sensors, and Solar Sync section on page 20.
CLIK SENSORS
Clik sensor setup is covered in detail in the Basic
Programming, Sensors, and Clik Sensors section
on page 18.
SENSOR RESPONSE
Sensor Response is covered in detail in the Basic
Programming, Sensors, and Flow Sensors section
on page 20.
A sensor response setting is required for any sensor to be able
to shut o any program in the controller.
Devices Menu