Installation Guide
M3569-01 • 05/11/15 • © 2015 Hunter Fan Company
www.HunterFan.com
1.888.830.1326
model 99108
plug-in controller
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the
receiving antenna, Increase the separation between the equipment and receiver, Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note: Any changes or modications to the transmitter or receiver not
expressly approved by Hunter Fan Company may void one’s authority to operate this remote control.
Read and Save These Instructions
This product conforms to UL Standard 60950.
WARNINGS
Hunter Fan Company Control Limited Warranty
The Hunter Fan Company makes the following limited warranty to the original purchaser of the plug-in
controller (“Control”): Your Control is warranted to be free from defects in material and workmanship
for a period of one year from the date of sale. If the Control malfunctions or fails within the warranty
period due to a defect in material or workmanship we will replace it free of charge. IF THE ORIGINAL
PURCHASER CEASES TO OWN THE CONTROL, THIS WARRANTY AND ANY IMPLIED WARRANTY,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, ARE VOIDED. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. THE DURATION OF ANY IMPLIED WARRANTY, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IN
RESPECT TO ANY CONTROL, IS EXPRESSLY LIMITED TO THE PERIOD OF THE EXPRESS WARRANTY
SET FORTH ABOVE FOR SUCH CONTROL. This warranty excludes malfunctions or failures which were
caused by repairs by persons not authorized by us, mishandling, improper installation, modications, or damage
to the Control while in your possession, or unreasonable use. This warranty does not apply to batteries or to
deterioration or damage to the product caused by the use of faulty batteries. IN NO EVENT SHALL HUNTER
FAN COMPANY BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES. SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION
OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
1
3
4
2 5
6
7
8
setup guide
Before Getting Started:
If you have not downloaded the app, do so now.
Visit your app store and search simpleconnect then install.
Make sure a compatible receiver is already installed in your fan.
If you need more information, visit the Info screen in the app.
Setup:
Record the PIN.
Write down the PIN located on the plug-in controller. You
will need the PIN to complete step 5.
PIN:
Insert the plug-in controller to a wall outlet.
The plug-in controller works up to 80 feet
from the fan/receiver.
Launch the app.
Make sure Bluetooth® is enabled on your device before
launching the app.
Tap the Controller button in the app.
If you are installing multiple plug-in controllers, be sure
to tap the Controller button that coincides with the
correct plug-in control.
Enter the PIN.
The 4-digit PIN can be found on the plug-in controller.
Tap Done when nished.
Tap the Gear icon shown below.
Tap the Gear icon on the main screen to navigate to the
“Rooms Congured” settings screen.
Gear icon
Tap the Gear icon shown below.
For independently operating fans, be sure to choose a
Gear icon for a room that is not already congured.
There is a maximum of four rooms per plug-in controller.
If you wish to operate multiple fans with one plug-in controller:
1. You will need an additional compatible receiver (sold separately)
installed in each fan. Receivers can be purchased at www.HunterFan.com.
2. Complete the entire Setup process below for the rst fan.
3. Once setup is complete for the rst fan, tap the Gear icon on the main screen to
navigate to the “Rooms Congured” settings screen.
4. For each additional fan, perform steps 7-10 on this page to complete setup.
Gear icon
To prevent faulty operation, please disconnect power from all other
ceiling fans within range while performing the next three steps.
Go to Advanced Features. Tap the Pair button.
If your bulbs support dimming, you may also turn
on the dimming feature at this screen.
9
Cycle power to the fan.
Turn power off and back on at the wall (or circuit breaker
if necessary).
Step 10 must be completed WITHIN THREE MINUTES of
restoring power to the fan.
Tap OK to conrm pairing.
Note: The lights will ash (if
applicable) and the fan will turn
on at low speed. This is visual
conrmation that the pairing was
successful.
10
Congratulations!
You have successfully set up your
additional receiver. Tap the Back
button twice to begin using the app
to take control of your fan!
You can now reconnect power to
your other fans.
If you have questions about
using the app or about setup and
installation, visit the Info screen in
the app for FAQs, videos, tutorials,
and more.
Compatible with iOS 7.1 or higher / Android 4.3 or higher. Android and Google Play are trademarks of Google Inc. Apple logo is a trademark of Apple, Inc. App store
is a service mark of Apple, Inc. Bluetooth® is a registered trademark of Bluetooth SIG. Symbol identies Class II equipment.