See page 1 ENGLISH Español Vea la página 9 Français Consulter la page 17 Owner’s Guide for Model 9 0 2 4 5 HUNTERS HIGH VELOCITY FAN 44806 04/02/2008
Important Safety Information Read & Save These Instructions CAution near an open flame, cooking or any other heating appliances. When using electrical appliances, basic precautions should always be taken to reduce the risk of fire, electric shock and personal injury: 12. DO NOT use near curtains, plants, window treatments, etc. 13. Never operate the fan if the grills are not properly installed. Operating the fan without the grills could result in serious injury. 1.
Welcome Unpacking Thank you for choosing a Hunter As you unpack the fan, save the carton Fan. This manual gives you complete and packing materials in case you want to instructions for using your fan. move or ship the unit in the future. Carefully remove all items from the box. Before using your fan, record the following information for your records and for NOTE: It is best to have someone hold warranty assistance. the box while you lift the fan and the protective packaging out of the carton.
Grounding Instructions LINE CORD SAFETY TIPS This appliance is for household use only and may be plugged into any 120-volt 1. NEVER pull or yank on the cord or the appliance. AC electrical outlet (ordinary household current). DO NOT use any other type of 2. To insert plug, grasp it firmly and guide it into the outlet. outlet. Warning 3. To disconnect the appliance, grasp the plug and remove it from the outlet. This unit is suitable for grounded receptacle use only. 4.
Assembly 1. Remove the 2 Pre-Installed Bolts [a] of the right end of the unit, with the included Allen Wrench [b]. The allen wrench is located inside the electrical box cover (see figure 3 below). [a] [b] [a] ENGLISH 2. Attach the Wheel Bracket Assembly [a] using the Longer Bolts [b] provided in the sack parts and tighten using the allen wrench provided. [b] [a] 3. Store the Allen Wrench [a] in the cover of the electrical box. This wrench can be used to adjust the tilt / swivel resistance (see page 6).
Operation ELECTRICAL BOX • Grounded • Circuit breaker protected with 7A overcurrent protection [a]. NOTE: If the breaker trips, unplug all cords and hit the reset button on the side of the box. ENGLISH [a] ADJUSTING TILT /SWIVEL RESISTANCE [a] 1. The cover of the electrical box holds the allen wrench needed for this operation (see page 5, step 3). 2. To adjust tilt resistance locate fasteners on both sides of the fans [b]. • To increase tilt resistance - turn clockwise.
STORAGE 1. ALWAYS store the fan in a dry place. 2. NEVER store the fan while it is still plugged in. 3. NEVER wrap the cord tightly around the fan. 4. DO NOT put any stress on the cord where it enters the fan, as it could cause the cord to break. MAINTENANCE This fan is permanently lubricated and will not require additional lubrication (oil) for the life of the fan. This fan requires little maintenance and contains no user serviceable parts. DO NOT try to fix it yourself.
