The C ENTURY ® High Performance Oscillating Fan OWNER’S GUIDE FOR MODELS 9002X & 9702X 41479-01 01/06/2005 41479-01 Rev 01-06-05.
IMPORTANT SAFETY INFORMATION Read & Save These Instructions WARNING To reduce the risk of fire or electrical shock, DO NOT use this fan with any solid-state speed control device. CAUTION When using electrical appliances, basic precautions should always be taken to reduce the risk of fire, electric shock and personal injury: 1. Read all instructions before using this fan. 2. Improper installation may result in the risk of fire, electric shock or personal injury. 3.
WELCOME UNPACKING Thank you for choosing the Hunter Century Table Fan. This manual gives you complete instructions for using your fan. Here are some the features you will enjoy with your fan: As you unpack the fan, save the carton and packing materials in case you want to move or ship the unit in the future.
GROUNDING INSTRUCTIONS This appliance is for household use only and may be plugged into any 120-volt AC electrical outlet (ordinary household current). DO NOT use any other type of outlet. WARNING This unit is suitable for grounded receptacle use only. The cord has a grounded plug as shown in Figure 1. An adapter, as shown in Figure 2, is available for connecting three-blade groundingtype plugs to two-slot receptacles.
OPERATION This appliance is for household use only. 1. Place the fan on a dry, safe, flat surface where it cannot fall or be pulled by the cord. 2. Plug the fan into a grounded 120-volt AC electrical outlet (ordinary household current). DO NOT use any other type of outlet. Make sure that the rated voltage of the fan is the same as the power source before plugging it into the power source. 5. To control the upward and downward direction of airflow, loosen the screw on the side of the fan housing neck.
MAINTENANCE This fan is permanently lubricated and will not require additional lubrication (oil) for the life of the fan. This fan requires little maintenance and contains no user serviceable parts. DO NOT try to fix it yourself. Contact qualified service personnel if servicing is needed. TO CLEAN: 1. Before cleaning, turn fan off and unplug from electrical outlet. Wipe off excess dust with a lintfree cloth. 2.
STORAGE TROUBLESHOOTING 1. Disassemble and clean fan before storing. 2. Keep the original packaging for the purpose of storing the fan. 3. ALWAYS store the fan in a dry place. PROBLEM • Fan will not oscillate. SOLUTION • Push down on knob on top of motor housing to activate oscillation. 4. NEVER store the fan while it is still plugged in. 5. NEVER wrap the cord tightly around the fan. 6. DO NOT put any stress on the cord where it enters the fan, as it could cause the cord to break.
® 8 41479-01 Rev 01-06-05.
