Installation Guide

43034-01
7
A19
I
A20
Connect wiring from the motor to the wiring cover
plate. DO NOT ALLOW THE MOTOR TO HANG
0000
A17
0000
A18
A21
Reinstall the motor by inserting the tabs and pushing
up into position. Make sure the wires are not pinched
between the motor and the housing.
Secure the motor by tightening the 2 screws.
Turn on the power source.
Test the motor. If the motor does not run, check the
plug connection.
A22
R20151220
FROM THE WIRING HARNESS.