Installation Guide

43034-01
10
B22
H
Connect wiring from the motor to the wiring cover
plate. DO NOT ALLOW THE MOTOR TO HANG
FROM THE WIRING HARNESS.
H
B23
Reinstall the motor by inserting the tabs and pushing
up into position. Make sure the wires are not pinched
between the motor and the housing.
B25
Turn on the power source.
ON
OFF
B26
Test the motor. If the motor does not run,
check the plug connection.
B24
I
Secure the motor by tightening the 2 screws.
B27
R20151220