Installation Guide
43041-01
18
E1
E3
E4
E5
E6
E2
K
K
J
L
Align posts A, B, C and D (stamped into motor housing) with
posts A, B, C and D (stamped into light fixture). Slide light
fixture over posts.
Remove the strain relief bracket screw. Position the strain relief bracket under the motor as shown.
Insert the strain relief bracket’s dog-leg tab so that it hooks
over the lip of the motor. Reinstall the strain relief bracket
screw.
Remove the thumbscrews. Connect wiring harness.
R20151220










