Manualshelf

Installation Guide

ManualsBrandsHunter ManualsHeating, Ventilation, and Air ConditioningGarden District Decorative Brushed Nickel 70 CFM Ceiling Exhaust Fan
12345678910
9
B17
B18
B21
B22
B20
Install the wiring cover plate. Make sure all wiring
connections are inside the box or under the wiring cover plate.
Install the wiring cover plate. Make sure all wiring connections
are inside the box or under the wiring cover plate..
Tighten screws.
Connect 4” duct and vent to the outside. Tape joints. If ducting
does not fit securely, an adapter may need to be purchased.
F1
B19
48050-01 - R20151220
Go to step F1 on page 18 to connect the wires as shown.
Connect wiring from the motor to the wiring cover plate.
DO NOT ALLOW THE MOTOR TO HANG FROM THE
WIRING HARNESS.