Manualshelf

Installation Guide

ManualsBrandsHunter ManualsHeating, Ventilation, and Air ConditioningGarden District Decorative Brushed Nickel 70 CFM Ceiling Exhaust Fan
11121314151617181920
13
C25
C26
C23
C24
Secure the motor by tightening the 2 screws.
Tighten the strain relief screws.
Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched between the motor
and the housing.
Install the wiring cover plate. Make sure all wiring connections
are inside the box or under the wiring cover plate.
F1
C22
C21
48050-01 - R20151220
Go to step F1 on page 18 to connect the wires as shown.
Connect wiring from the motor to the wiring cover plate.
DO NOT ALLOW THE MOTOR TO HANG FROM THE
WIRING HARNESS.