Installation Guide

7
1886
1886
Installing the Blades:
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy Screw
x8
Blade Iron Screw
bag
Install the blade grommets, found in the hardware bag, in the blades by hand. Place
each blade between a blade iron and medallion. Install three blade screws, found in the
hardware bag, to attach the medallion to the blade iron. Repeat this step for each blade.
Repeat x4
Repeat x4
x12
x12
bag
Blade Screw
Blade Grommet
bag
Lightly attach the blade irons to the motor with screws found in the
hardware bag, then securely tighten after both screws are attached. Repeat
this step for each blade assembly.
Remember the screws that you kept after
removing the shipping ring? You need them plus
screws from the hardware bag for this step.
Installing the Glass
Assembling the Light Kit
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Bulbs/Glass Remote CradleRemote