Instructions / Assembly

9
1886
Installing the Light Fixture
Keyhole
Slot
Connect the plugs from the upper and
lower switch housings. Make sure to
line up the colored markings on the
connectors and that the connectors latch.
Align the three keyhole slots in the light kit
with the three assembly screws in the posts.
Lift the light kit and twist counterclockwise
to lock it into place. Be sure that both pull
chains are hanging freely.
Install a bulb into each of the
sockets. When necessary, replace
with bulbs of the same wattage.
Install the xture screw that
was set aside and tighten
all four screws securely.
This is a screw you saved that
was attached to the red ag.
Fixture Screw
Ceiling Bracket Housing Downrod Hanging Fan Wiring BladesCanopy Light FixtureHood Pull Chains Glass/Cage
Installing the Pull Chains
Installing the Glass and Light Fixture Cage
WARNING
FAN FALL HAZARD
Make sure screws are tight to secure the
light xture.