Installation Guide

5
1886
1886
Ceiling Bracket Hanging Fan Wiring Installing Fan Body Blades Light Remote
Installing the Glass
Assembling the Light Kit
Installing the Blades:
Insert the blade into the blade slot.
Repeat x3
x9
bag
Blade Screw
x9
bag
Blade Washer
Put the blade washers found in the hardware
bag onto the blade screws found in the
hardware bag. Then install the blade screws to
secure each blade to the fan.
Installing the Fan Body
2 of 4
Canopy Screw
bag
Install the remaining two
canopy screws by holding the
fan body cover to the ceiling
mounting plate. Tighten all
four screws securely.
Align the hanging slots on both
sides of the fan body with the two
partially installed canopy screws.
Slide the two slots on both sides of
the fan body between the head of
the screws and rotate the fan body
counterclockwise so the screws
hold the fan body rmly in place.
Using both hands, lift the fan body
from the hook
Repeat x3