Specification

www.HunterFan.com

1.888.830.1326

Light Kit

Make sure the light kit assembly is securely attached to the

upper switch housing. Failure to properly secure all three

assembly screws could result in the light xture falling.

Partially install two of the switch housing

assembly screws found in the bag. It

does not matter which two screw holes

you choose. Connect the plugs from the

upper and lower switch housings. Make

sure to line up the colored markings on

the connectors.

Align the keyhole slots in the light kit

housing with the two screws. Make sure

all the wires from the fan and the light kit

are snug inside the center of the light kit,

not pinched in between the upper switch

housing and the light kit or hanging out

of the sides.

Turn the light kit counterclockwise until

the light kit screws are rmly situated

in the narrow end of the keyhole slots.

Install the third screw and tighten all

three screws securely.

Switch

Housing

Assembly

Screw