Instructions / Assembly

Monday - Friday 8am - 6pm CST
Saturday 11am - 4pm CST
(English or Español)
1.888.830.1326
www.HunterFan.com
Light Kit
Connect the plugs from the upper and
lower switch housings. Make sure to
line up the colored markings on the
connectors. Wrap light kit keyhole
slots around the screws and twist
counterclockwise.
Screw two housing assembly screws from
the hardware bag halfway into the
upper switch housing. It does not matter
which two screw holes you choose.
Insert the third screw, found in the
hardware bag, into place and then tighten
all three screws.
Note: Remove the pre-installed light
kit assembly screw and red ag from
the light kit assembly. Save the screw. It
will be needed for installation
14
M3639-01 • 12/19/16 • © 2016 Hunter Fan Company