Specification

www.HunterFan.com

1.888.830.1326

Globe

See next page for fan

operation instructions.

Lift the globe assembly and attach

it to the upper switch housing using

the three thumbscrews, found in

the hardware bag. Tighten all

three screws securely by hand.

Carefully lower the globe

into the globe retainer until it

rests in place.

CONGRATULATIONS!

YOU’RE DONE!

Install a bulb into each of

the sockets. When necessary,

replace with bulbs of the same

type and wattage.

Make sure the globe assembly is securely attached to the

switch housing. Failure to properly secure all three assembly

screws could result in the light xture falling.