Specification

English
Español Portugês
16
14 15
To connect the wires, hold the bare metal leads together and
place a wire connector over them, then twist the wire connector
clockwise until tight.
Para conectar los alambres, sostenga los extremos de los alambres
juntos y coloque un empalme plástico sobre ellos y gírelo en
sentido horario hasta que quede apretado.
Para conectar os os, junte as extremidades metálicas e coloque
um prendedor de fios, em seguida torça o prendedor de fio no
sentido horário até que que rme.
Single Switch Wiring:
•e bare or green/yellow ground wire from the ceiling to the
green/yellow ground wire from the ceiling plate and the green/
yellow ground wire from the fan
•e white wire from the ceiling to the white wire from the fan
•e black wire from the ceiling to the black and the black/white
wire from the fan
Cableado para un solo interruptor:
• El alambre desnudo o verde de tierra/amarillo desde el techo al
alambre verde de tierra/amarillo de la placa de techo y al alambre
verde de tierra del ventilador
• El alambre blanco del techo con el alambre blanco del
ventilador
• El alambre negro del techo al alambre negro y al alambre negro/
blanco del ventilador
Instalação de um Único Interruptor:
•O o terra verde e amarelo ou sem revestimento do teto no o
verde e amarelo terra da placa de teto e no fio verde terra do
ventilador
•O o branco do teto no fio branco do ventilador
•O o preto do teto no o preto e no o preto/branco do
ventilador