For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name Camille Owner’s Guide and Installation Manual __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased English Español Form M0021-01 20130418 ©2013 Hunter Fan Co.
Welcome Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.
Preparing the Fan Site Step 1 - Choose the Fan Site Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operation, maximum efficiency, and energy savings. Choose a fan site where: • No object can come in contact with the rotating fan blades during normal operation. • The fan blades are at least 7 feet above the floor and the ceiling is at least 8 feet high.
Preparing the Fan Site (continued) Step 2 - Cut the Ceiling Hole 2-1. Locate the site for the ceiling hole directly below the joist or support brace that will hold the outlet box and fan. 2-2. Cut a 4” diameter hole through the drywall or plaster of the ceiling. You will use the hole to install the support brace and outlet box. Step 3 - Install a Support Brace, If Necessary Determine if there is a ceiling joist directly above the ceiling hole.
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Standard Mounting Style Ceiling Outlet Box Considering Optional Accessories Consider using Hunter’s optional accessories, including a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls.
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician.
2 • Installing the Ceiling Bracket CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. Isolator Ceiling Bracket 2-1. Note: The ceiling bracket may be mounted to an existing ceiling-fan-rated outlet box.
3 • Assembling and Hanging the Fan WARNING: Fan may fall if not assembled as directed in these installation instructions. Downrod You can assemble your fan for standard or angled mounting as shown in steps below. 3-1. Unbundle the wires from the fan. 3-2. Feed the wires from the fan through the downrod. Note: Make sure all the wires are on the same side of the metal dowel pin inside the downrod. 3-3. Loosen the square head setscrew on the adapter in order to install the downrod. 3-4.
4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. CEILING OM FR 4-1. Make sure the power is still off at the breaker box.
4 • Wiring the Fan (continued) 4-5. Using the large wire connectors, connect the white wire (grounded) and the black wire (ungrounded) from the ceiling as follows: • The white (grounded) wire from the ceiling to the white wire from the receiver (marked on white tag “NEUTRAL IN”) • The black (ungrounded) wire from the ceiling to the black wire from the receiver (marked on white tag “LIVE IN”) OM CEILING FR FR OM black white Step 4-5 black (ungrounded) white (grounded) 4-6.
6 • Assembling the Blades 6-1. Insert grommets into the holes in the blades. Step 6-1 (Detail) 6-2. Install one blade onto a blade iron with three blade assembly screws. 6-3. Repeat Steps 6-1 – 6-2 until all three blades are installed.
7 • Completing Your Installation With a Bowl Light Fixture WARNING: Use only the light fixture supplied with this fan model. 7-1. Partially install two housing assembly screws into the mounting plate on the bottom of the fan. 7-2. Feed the upper plug connector from the motor through the center opening of the shroud. 7-3. Slide the partially installed screws through the keyhole slots in the shroud. Turn the shroud counter-clockwise until the screws are nestled in the narrow ends of the keyhole slots. 7-4.
7 • Completing Your Installation With a Bowl Light Fixture (Continued) 7-6. Connect the upper plug connector from the fan to the lower plug connector in the light fixture. Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product. 7-7. Partially install two housing assembly screws into the shroud. 7-8.
7 • Completing Your Installation With a Bowl Light Fixture (Continued) 7-10. Install the included bulbs (40 W max). 7-11. Hold the glass bowl up so it fits in the shroud. 7-12. Hold the cover plate up to the bottom of the glass bowl and secure them both by screwing the finial into the threaded rod on the bottom of the light fixture. 7-13. Attach the extra pull chains with pendants (included) to the light and fan pull chains using the breakaway connector.
8 • Operating the Remote Control and Mounting the Holder 8-1. Turn on electrical power to the fan. 8-2. To install or replace the battery, remove the door from the back of the transmitter. Insert the battery into the compartment, observing proper polarity placement. Note: The remote must be paired before the fan will operate. 8-3. Within 3 minutes of restoring power to the fan, press both the Fan Off button and the High button for at least 4 seconds.
9 • Operating and Cleaning Your Ceiling Fan 9-1. The remote controls power to the fan. The fan has four settings in sequence: High, Medium, Low and Off. 9-2. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a direct breeze. In winter, having the fan draw air upward (clockwise blade rotation) will distribute the warmer air trapped at the ceiling around the room without causing a draft. 9-3.
10 • Troubleshooting Problem: Nothing happens; fan does not move 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. Remove the shipping bumpers. Problem: Noisy operation 1.
