Instructions / Assembly
9
1886
Assembling the Light
Installing the Bulb and Glass
ON
Turn Power
Need a little more help with assembling this light?
Visit our light kit video at: http://bit.ly/HunterQuickConnect
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Remote Troubleshooting
Connect the plugs from the fan and light xture. Make sure to line
up the colored markings on the connectors. Push the connector
and excess wire into the hole at the top of the light xture. The
connector and excess wiring must be pushed into the light xture
in order to successfully mount the light xture to the fan.
Raise the light xture to the bottom of the fan.
Align the holes on the mounting ring on the
top of the light xture with the spaces in the
mounting bracket on the bottom of the fan.
Hole
Click!
Some components not shown for visual clarity.
Hold the fan body stationary and rotate
the light xture clockwise to engage the
locking pin. Listen for the click.
Install each included LED
bulb into their sockets.
When necessary, replace
with bulbs of the same
wattage.
Repeat x3
Repeat x3
Remove the socket rings
from the sockets. Install the
shades onto the sockets.
Install the socket rings onto
the sockets. Tighten them by
turning clockwise with the
socket ring glass tool.
Want to install your fan without a light kit?
Go to www.HunterFan.com/FAQs and click “How do I install my
fan without the light kit?”
Hunter Pro Tip:
Repeat x5
Canopy Screw
Blade Screw
Grommet
Blade Arm Screw
Remove the cardboard plug
guard before proceeding!