Specification

www.HunterFan.com
1.888.830.1326
Light Kit
Connect the plugs from the upper
and lower switch housings. Make sure
to line up the colored markings on
the connectors.Wrap light kit keyhole
slots around the screws and twist
counterclockwise.
Screw two housing assembly screws from
the hardware bag halfway into the
upper switch housing. It does not matter
which two screw holes you choose.
Insert the third screw, found in the
hardware bag, into place and then tighten
all three screws.
13
M3611-01 • 06/06/16 • © 2016 Hunter Fan Company