Specification

www.HunterFan.com
1.888.830.1326
Light Kit (continued)
CONGRATULATIONS!
YOU’RE DONE!
Install the included LED
bulbs into the sockets. When
necessary, replace with bulbs
of the same wattage.
Note: Glass shade style and number of lights may vary.
See next page for fan
operation instructions.
Remove and discard the plastic
connectors from the ends of the
pull chains (if necessary), then
connect the appropriate pull chain
pendant to each of the short chains
coming from the switch housing.
Remove the socket rings from the
sockets. Install the shades onto
the sockets. Install the socket
rings onto the sockets. Tighten
them by turning clockwise with
the socket ring glass tool.
Shade
Socket
Socket Ring
Socket
Ring Tool
Fan
Pull
Chain
Light
Pull
Chain
15
15
M0110-01 • 10/13/15 • © 2015 Hunter Fan Company