Instruction Manual

8
Installation – Light Kit
Complete
3c3c
3a3a
3b3b
3d3d
Hold the fan body stationary and rotate the light
xture clockwise to engage the locking pin.
Notch
IMPORTANT
Push the connector and excess wire into the hole at
the top of the light xture. The connector and excess
wiring must be pushed into the light xture in order to
successfully mount the light xture to the fan.
Pin
Raise the light kit to the bottom of the fan. Align the
notch on the mounting ring on the top of the light kit
with the pin in the mounting bracket on the bottom of
the fan.
Connect the plugs from the fan and light xture.
Make sure to line up the colored markings on the
connectors.
Remove the cardboard plug
guard before proceeding!
HOLD HERE