Specification

7
8
1886
1886
Screw
Holes
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Switch Housing
Canopy Screw
Want to install your fan with a light kit?
Go to www.HunterFan.com/FAQs and click
“How do I install my fan with the light kit?”
Hunter Pro Tip:
Fan style may vary.
Note:
Fan style may vary.
Note:
Connect the plugs from the upper and
lower switch housings. Make sure to line
up the colored markings on the connectors.
Lift the lower switch housing until the
screw holes are aligned with the screw
holes in the upper switch housing. Install
the three switch housing screws found in
the hardware bag.
3 of 3
Assembly Screw
bag
1
STEP
2
STEP
Assembling the Switch Housing
WARNING
FAN FALL HAZARD
Make sure all three screws are tight to secure the
lower switch housing to the upper switch housing
The fan pull chain controls
the speed: from high to off.
Installing the Pull Chains
Reverse
Switch
Attach the pull chain pendant to the fan pull chain. Ceiling fans work in two directions: downdraft (counterclockwise rotation)
and updraft (clockwise rotation). To change the direction of air ow, turn the fan off and let it come to a complete stop. Slide
the reversing switch to the opposite position. Restart the fan.
Updraft (clockwise rotation)
creates a more indirect airow.
Updraft airow is great for
moving warm air downward.
Downdraft (counterclockwise
rotation) creates a direct breeze
and maximum cooling effect.