Owner’s Manual English Model 47377 5 MINUTE I N S T A L L A T I O N 7 Day Programmable M T W T F S S Form# 44118-01 20120806 ©2012 Hunter Fan Co.
Table of Contents At A Glance Know Your Thermostat �������������������������������������������������������������������������������������������������������3 Setup Setting Day and Time ���������������������������������������������������������������������������������������������������������10 Scheduling Scheduling Introduction ���������������������������������������������������������������������������������������������������12 Personal Scheduling Charts ����������������������������������������������������
Know Your Thermostat Your thermostat has been pre-programmed from the factory with no programming necessary. We recommend using these pre-programmed settings for a few days before altering them as they offer maximum energy saving benefits. If you do decide to alter your programs, use the charts on page 13 to write out your scheduled times and temperatures. After you have recorded your preferences, follow the instructions on page 14 to alter your temperature settings.
Know Your Thermostat 1. Enters Schedule Setup for altering scheduled programs. 2. Sets the Home Today feature for when you are home during a regularly scheduled Away period. 3. Sets the Save Away feature for when you will not be home during a regularly programmed time. 4. Confirms completion of an action or returns you to the Home screen. 5. Allows access to the advanced features of the thermostat. 6. Moves you forward or backward while setting up features or schedules. 7.
Know Your Thermostat 1 2 7 3 6 4 5 8 6 9 10 ©2012 Hunter Fan Company 11 5
Know Your Thermostat 1. Holds 2 “AA” Batteries. 2. HE/HG Switch - allows you to set your furnace to Gas/Oil or Electric, based on the type of system you have. 3. Conventional/Heat Pump System Switch - Allows your thermostat to operate your HVAC system properly by selecting the system type that you have. * Conventional System: Uses a condensing unit for cooling and a separate furnace system for heating. * Heat Pump System: Uses the condensing unit for both heating and cooling.
Know Your Thermostat 1 2 3 ©2012 Hunter Fan Company 7
Know Your Thermostat 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 8 Shows the current day of the week or weekend. Indicates the thermostat is running in schedule mode. Flashes when the furnace filter should be checked for replacement. On when the current schedule period is running. Shows the current mode of the fan: Auto or On. C will display when in Celsius mode. Nothing will display when set to Fahrenheit. Indicates the current active schedule period.
Know Your Thermostat 2 Mon 1 Filter Auto 5 At Home 7 3 4 8 10 13 14 PM 16 17 Hours : o C 6 9 Heat to 12 o 11 15 Energy Savings: Good 18 Best! ©2012 Hunter Fan Company 19 Lock 9
Setting Day and Time Once you install the batteries, the thermostat will prompt you to set the current day and time. 1. You will notice that “Mon” will be flashing at the top left of your screen. Use the or buttons to move to your current day of the week and press the Next button to advance to the next step. 2. Use the or button to change between am and pm. Choose 3. Next you will select your current hour by using the advances you to the next step. 4.
Setting Day and Time 1-2 3 Mon Schedule Home Today PM Save Away Mon Schedule Home Today : Done/ Home Back PM : Save Away Menu Next 4 Back Done/ Home Menu Done/ Home Menu Next 5 Mon Schedule Home Today PM Schedule Home Today : Save Away Updated! Save Away Back Done/ Home Menu Next Back ©2012 Hunter Fan Company Next 11
Scheduling Introduction Read the scheduling section thoroughly to ensure you understand your scheduling options and which will best fit with your lifestyle. The following notes should help you with scheduling: * The schedule time can be set in 15 minute increments, and remains the same for both Heat and Cool programs. * The scheduled temperature can be set in increments of 1°F (1°C). * After 15 minute without a key press, the thermostat will return to the home display screen.
Personal Scheduling Charts Default Schedule Day Monday-Friday Saturday Sunday Away Asleep Start Time: 8:00am End Time: 6:00pm Heat Temp: 63OF (17OC) Cool Temp: 82OF (28OC) Start Time: 8:00am End Time: 6:00pm Heat Temp: 63OF (17OC) Cool Temp: 82OF (28OC) Start Time: 8:00am End Time: 6:00pm Heat Temp: 63OF (17OC) Cool Temp: 82OF (28OC) Start Time: 10:00pm End Time: 6:00am Heat Temp: 67OF (19OC) Cool Temp: 76OF (24OC) Start Time: 10:00pm End Time: 6:00am Heat Temp: 67OF (19OC) Cool Temp: 76OF (28OC) Star
Setting Your Schedule 1. Press the 2. Use the Schedule or Button to enter Scheduling mode. buttons to select “On” and then Next to move forward to Scheduling. Note: If you do not wish to use the scheduling option on your thermostat, refer to page 22, step 2. 3. Monday will be flashing on the screen, to proceed with scheduling, press Next . If you wish to start programming another day, press the or button until it shows at the top of the screen and press Next . 4.
Setting Your Schedule 1 2 Mon Schedule Schedule o At Home Home Today AM Save Away : Good Back Off Auto Energy Savings: Done/ Home Heat to o Home Today Best! Save Away Menu Next 3 Schedule On Done/ Home Back Menu Next 4-5 Mon Tues Wed Thu Fri Sat Sun Schedule Schedule Home Today Home Today Save Away Save Away Back Done/ Home Menu Next Away Asleep At Home AM Mon : to Good Back ©2012 Hunter Fan Company : Energy Savings: Done/ Home PM Best! Menu Next 15
Setting Your Schedule 6. Set the temperature for your heating cycle as indicated by the flashing ”Heat to” icon on your screen. Use the and buttons to change the temperature and press Next . You will be asked to set your cooling cycle, indicated by the flashing “Cool to”. Set this temperature with your or buttons and hit Next . 7. The thermostat will start this process again for “Asleep”. Repeat steps 1-5 to schedule the time and set the temperature for your sleep period.
Setting Your Schedule 6 Schedule 7 Mon Schedule Away Asleep At Home Home Today AM Save Away o to Good Energy Savings: Done/ Home Back Home Today Heat to : : PM Cool to Next 8 Schedule o : PM Save Away Best! Menu Mon Away Asleep At Home to Good Back : Energy Savings: Heat to AM Cool to Best! Done/ Home Menu Done/ Home Menu Next 9 Mon o Home Today Home Today Heat to Cool to Save Away Good Back Mon Schedule Away Asleep At Home Energy Savings: Done/ Home Save A
Setting Your Schedule 10. The day select screen will now show “Copy Day” and ask you if you wish to copy the day you just scheduled to any other days. Select “YES” and Next or see step 13 for selecting “NO”. 11. Select each day you wish to copy the schedule to by using the or buttons to turn days on or off and the Next or Back buttons to scroll through the days. An arrow above each day will indicate it has been selected.
Setting Your Schedule 10 11 Mon Schedule Tues Wed Thu Fri Sat Sun Schedule Copy Day Home Today Home Today Save Away Save Away Back Done/ Home Menu Next 12 Back Done/ Home Menu Done/ Home Menu Next 13 Mon Tues Wed Thu Fri Schedule Schedule Home Today Home Today Save Away Save Away Back Done/ Home Menu Next Schedule Updated! Back ©2012 Hunter Fan Company Next 19
Temporary Temperature Change With Temporary Temperature Change you have the ability to alter the temperature for only the current running schedule. 1. Press the 2. Use the 3. Press the or or Done/ Home button once to activate the screen, the backlight will come on. buttons again to select a new temperature. button to save changes. Note: Temporary Temperature Change is not a permanent setting. Your thermostat will only run the new temperature until the next scheduled period change.
Temporary Schedule Change 1 2 Mon Schedule Mon Schedule o At Home Home Today AM Save Away o At Home Auto : Good Energy Savings: Done/ Home Back Heat to o Home Today Best! Save Away Menu Next 3 AM Auto Heat to o : Good Back Energy Savings: Best! Done/ Home Menu Done/ Home Menu Next 4 Mon Schedule Schedule o At Home Home Today AM Save Away Auto : Good Back Energy Savings: Done/ Home Heat to o Home Today Best! Save Away Menu Next Schedule On Back ©2012 Hunte
Turning Off Scheduling To turn off your schedule and have the thermostat permanently set to one temperature: 1. Press the button once. Schedule 2. Use the or button to switch to Off and select Done/ Home . 3. The screen will show “Updated!” and return you to the home screen. Note: You will notice the black bar on the screen beside the Schedule button is not displayed anymore. This indicates, no schedule is set to run. 4. From the home screen, use the or buttons to adjust your temperature.
Turning Off Scheduling 1 2 Mon Schedule Schedule o At Home Home Today AM Save Away : Good Back Off Auto Energy Savings: Heat to o Home Today Best! Save Away Done/ Home Menu Done/ Home Menu Schedule On Next Back Done/ Home Menu Next 3 Schedule Home Today Updated! Save Away Back Next ©2012 Hunter Fan Company 23
Home Today The Home Today feature allows you to override your schedule for 1 day. It can be used for example if you are home on a day when you would normally have the thermostat‘s “Away” mode active. When used, the Home Today feature will select your At Home temperature to run at for the course of the day until your scheduled Asleep time starts, then revert back to running your normal schedule. To activate: 1. Press the button. Home Today 2.
Home Today 1 2 Mon Schedule Schedule o At Home Home Today AM Save Away Auto : Good Back Energy Savings: Heat to o Home Today Best! Save Away Done/ Home Menu Done/ Home Menu Next Heat to Good Back Energy Savings: Done/ Home Best! Menu Next 3 Schedule Home Today Updated! Save Away Back Next ©2012 Hunter Fan Company 25
Save Away The Save Away feature allows you to set a lower or higher temperature for the time you will be away from your home outside of your normal Away schedule. This can include days you will be away for vacation, or a few hours away from your home. The Save Away feature can be set for as little as 1 hour or as much as 30 days. To set the save away feature: 1. Press the Save Away button. 2.
Save Away 1 2 Mon Schedule Schedule o At Home Home Today AM Save Away Auto : Good Back Energy Savings: Heat to o Home Today Best! Save Away Done/ Home Menu Done/ Home Menu Next Heat to o Hours Good Back Energy Savings: Done/ Home Best! Menu Next 3 Schedule Home Today Updated! Save Away Back Next ©2012 Hunter Fan Company 27
Alerts This chapter will outline the various alerts the thermostat will report to you and how to respond to them. 1. Low Battery: This icon will appear when your batteries are starting to run low on power and should be changed to avoid system interruptions, (Figure 1) Change the batteries by gripping the sides of the thermostat firmly and pulling straight back, (Figure 1a). The batteries are located in the backside of the thermostat. The thermostat requires 2 (AA) alkaline batteries to operate.
Alerts 1 1a Mon Schedule At Home Home Today PM Save Away Auto Heat to : Good Back Energy Savings: Done/ Home Best! Menu Next 1b 2 Schedule Mon Schedule At Home Home Today Home Today Save Away Save Away Back Done/ Home Menu Next PM o Filter Auto Heat to o : Good Back ©2012 Hunter Fan Company Energy Savings: Done/ Home Best! Menu Next 29
Alerts 3. Auxiliary Heat: On multi-stage heat pumps this alert indicates your second stage heat is running.
Alerts 3 Mon Schedule o At Home Home Today PM Save Away Auto Aux Em.
Menu Options Under your menu options you have the ability to reset your filter counter, change your day/time, span settings, temperature measurement, as well as locking the thermostat. After making changes to each menu option, the thermostat will show “Updated” and save your changes. To access these options: 1. Press the button. Menu 2. Once in the menu options list, use the or buttons to scroll through the menu items. The Next button will take you into the selected menu item.
Menu Options 1 2 Mon Schedule Schedule Reset Filter Set Day/Time o At Home Home Today PM Save Away Auto : Good Back Energy Savings: Done/ Home Heat to o Home Today Best! Save Away Menu Next 3 Span 1 Span 2 Temp F/C UN Lock Done/ Home Back Menu Next 4 Schedule Reset Filter Set Day/Time Home Today Home Today Save Away Save Away Back Done/ Home Menu Next Mon Schedule PM Back ©2012 Hunter Fan Company : Done/ Home Menu Next 33
Menu Options 5. SPAN 1: The next menu option is to set your thermostats primary span. Use the or buttons to adjust between 1, 2, or, 3 degrees. Press Next , the screen will flash “Updated” and return to menu options or press to return to the home screen. The span setting regulates when and how long your system will run. The span has been set at the factory to 1 which will allow the system to turn on 1F (0.5OC) above or below the set temperature and run for 1 OF (0.5OC) above or below the set temperature.
Menu Options 5 6 Schedule Schedule o o Span 1 Home Today Home Today Save Away Save Away Back Done/ Home Menu Next Span 2 Back Done/ Home Menu Next 7 Schedule Home Today Temp F/C Save Away Back Done/ Home Menu Next ©2012 Hunter Fan Company 35
Menu Options 1. LOCK/UNLOCK: Allows you to lock the thermostat so random keypress’ will not change your settings. Use the or buttons to change between “YES” and “NO”. Choose “YES” to lock the thermostat or “NO” to keep the thermostat unlocked. Press Next , the screen will flash “Updated” and return to menu options or press to return the home screen. Done/ Home 2. When locked, the thermostat will disable all keys except the key.
Menu Options 1 2 Schedule Mon Schedule o At Home Home Today Home Today Save Away Lock Back Done/ Home Menu PM Save Away Next Auto Heat to o : Good Back Energy Savings: Done/ Home Best! Menu Lock Next 4 3 Schedule Reset Filter Set Day/Time Span 1 Span 2 Home Today Temp F/C Un Lock Save Away Back Done/ Home Menu Next Schedule Home Today Un Lock Save Away Back ©2012 Hunter Fan Company Done/ Home Menu Next 37
Energy Saver Bar The Energy Saver Bar indicates estimated energy savings. The preset schedules in the thermostat have been designed to give you optimal energy savings, five bars. Altering these schedules has a direct impact on the energy saver indicator. Altering the temperatures and/or times that the schedules run could decrease the estimated energy savings. 1. Example 1 shows the thermostat running the default schedules in the thermostat. 2. Example 2 shows the thermostat running altered schedules.
Energy Saver Bar 1 2 Mon Schedule Mon Schedule o At Home Home Today PM Save Away 7:00 Good Back o At Home Auto 71 Energy Savings: Done/ Home Home Today Heat to o Save Away Best! Menu PM Next Auto 7:00 Good Back ©2012 Hunter Fan Company 74 Energy Savings: Done/ Home Heat to o Best! Menu Next 39
Additional Features Armchair Programming There is no need to stand at the wall where the thermostat is mounted while programming or changing settings. Simply remove the thermostat from the wall and make the necessary changes in the comfort of a chair. You can also set your programming and settings before you even install the thermostat. Blue Backlight Your thermostat has a blue LED lamp that backlights the display for easy viewing in the dark. When any key is pressed, the backlight will be activated.
Troubleshooting and Support Problem: No display. Solution: 1. Check battery position and battery life. Problem: Program does not change at desired setting. Solution: 1. Check the time in all programs for proper am/pm time. 2. Ensure thermostat is not in “Save Away” mode. 3. Make sure the thermostat is set to the proper day. Problem: Auto / Fan does not turn on. Solution: 1. Move HG/HE switch to opposite position. 2. Check the fan setting and make sure that it is not set to off.
Troubleshooting and Support Problem: Fan runs continuously. Solution: 1. Check fan setting to see if it is set to on. 2. Move HG/HE switch to opposite position. Problem: Heating or cooling does not turn on or off. Solution: 1. Check the system is in the right mode (heat or cool). 2. Be sure to wait up to 3.5 minutes for system protection if your system was just on. 3. Check breakers to make sure power is getting to your system. 4. Replace the batteries.
Technical Support If you need any assistance with installion or setup of your new Hunter Thermostat, please call us, our technical support staff is ready to help! USA: 1-888-830-1326 Canada: 1-866-268-1936 Hours of operation are from 7:00 am to 7:00 pm Monday - Friday and 8:00 am to 5:00 pm on Saturday, Central Time. You may also contact us over the Internet at www.HunterFan.
1 Year Guarantee Hunter Fan Company Thermostats LIMITED WARRANTY The Hunter Fan Company warrants your Hunter Thermostat to be free from defects in material or workmanship for a period of one year from the date of sale to the original user or consumer purchaser. If your Hunter Thermostat malfunctions or fails within the warranty period because of a defect in material or workmanship, we will replace it. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES.
1 Year Guarantee Suite 400, Memphis, TN 38016. You will be responsible for all insurance and freight or other transportation charges to our factory. We will return your Hunter Thermostat freight prepaid. Your Hunter Thermostat should be properly packed to avoid damage in transit since we will not be responsible for any such damage. Proof of purchase is required when requesting warranty service. IN NO EVENT SHALL HUNTER FAN COMPANY BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES.
