Specification

4
Initial Setup:
1.
2. Unravel and straighten the cord before use.
3. Remove the Water Tank from the Base by pulling straight up
4. Turn the Water Tank upside down and twist the Water Tank
5. Fill the unit with clean, cool tap water.
Warning:
6. Place the Water Tank Cap back on the Water Tank and turn
it clockwise until secure.
7. Place the Water Tank back into the Base, making sure it is
seated securely.
Note:
Failure to ensure the Water Tank is seated correctly
could cause the unit to leak water.
8.
Figure 1
Figure 2
Using Your Humidifier
Tank
Spout
Figure 3
Figure 4
Operation:
1.
until you feel the knob click. At this time, the unit should be on.
Adjust the amount of mist/vapor the unit outputs by turning the
mist adjust knob clockwise. To turn the unit off, turn the power
2.
illuminate.
3.
Function and Features:
Humidity - should be illuminated when unit is running.
indicator on the front panel will light up.
Heat Mist -
Heat Mist button. The Heat Light will illuminate to indicate
will humidify your room quicker.
Mist Adjust - Turn dial to adjust the vapor/mist output.
Turn clockwise to increase the output.
360° Spout Rotation - The spout can rotate a full 360°.
Power
Tank
Heat
Mist
Adjust
Heat
Mist
Humidity
on Tank Handle. (Figure 1)
Cap counter-clockwise to remove. (Figure 2)
knob counter-clockwise until it clicks. (Figure 3)
(Figure 1)
Water
Water
Tank
Handle
o
p
e
n
Power - turns unit off and on. (Figure 3)
Knob
20303-01 20141029