Installation guide

15
42486-01 • 03/06/12 • Hunter Fan Company
Breakaway
Connector
8 • Completing Your Installation With a Bowl Light Fixture (Continued)
8-10. Install the included bulbs (40W max).
8-11. Hold the glass bowl up so it ts in the shroud.
8-12. Hold the cover plate up to the bottom of the glass
bowl and secure them both by screwing the nial into
the threaded rod on the bottom of the light xture.
8-13. Attach the extra pull chains with pendants (included)
to the light and fan pull chains using the breakaway
connector. (You may nd the breakaway connector
on the end of the extra chains.)
Step 8-10
Steps 8-10 – 8-11