Installation Guide

9
4.1. Find the looped end of the braided cable and insert it through the
ceiling plate and one of the holes in the outlet box into the ceiling.
4.2. Access the support brace in the ceiling. You may not be able to do
this from below the ceiling depending on your installation site.
4.3. Drive a wood screw and washer into the side of the brace that
holds the outlet box. Leave 3 mm (1/8”) of space between the
support brace and the washer.
4.4. Wrap the braided cable around the support brace once creating a
complete circle.
4.5. Hook the looped end of the cable over the wood screw so that the
braided cable lies between the washer and the support brace.
4.6. Tighten the loop and secure the screw and washer all the way
down to the support brace.
4.7. Coil up the excess cable.
4.8. Return to the fan so you can complete the fan wiring.
Step 4-1
3mm (1/8")
Steps 4-2 – 4-3
Steps 4-4 – 4-5
Steps 4-6 – 4-7
Support
Brace
Ceiling
Outlet Box
Braided
Cable
4 • Securing Fan to Secondary Support System
42487-01 • 01/03/12 • Hunter Fan Company