Installation Guide
14
8 • Completing Your Installation With a Multi Staked Light Fixture (continued)
Step 8-6 – 8-8
umb Screw
Glass
Shade
umb
Screw
Note: Glass shade style and number of lights may vary.
7-6. To install each shade, rst loosen the three thumbscrews.
7-7. Raise the shade to the light xture. Tighten the
thumbscrews securely.
7-8. Install B10 candelabra-based light bulbs (40 Watt
maximum each).
Note: In compliance with Canadian federal energy regulations,
this ceiling fan contains a device that restricts its light
output. Exceeding the wattage limit marked on the
MAX wattage sticker axed to the light socket(s) may
result in re hazard or improper operation.
42487-01 • 01/03/12 • Hunter Fan Company