Installation Guide

7 • Assembling the Blades

Our blade assembly enables you to lock the blades in place without tools and

to remove the blades easily for cleaning.

7-1. Align the three holes in the blade with the three blade iron posts.

7-2. Using two hands, squeeze the blade and blade iron together with your

thumbs under the blade iron and your ngers on top of the blade. You will

feel the blade lock into place.

7-3. Make sure the blade is securely attached to the blade iron and the ared

tops of the blade iron posts are fully visible above the blade.

7-4. Repeat steps 6-1 through 6-3 until all the blades are installed.

Step 7-2

Step 7-1

Blade

Blade Iron

Post

CAUTION: Be sure

blade is locked into place

and that the head of

each blade iron post is

completely visible.

WRONG

Step 7-3b

WRONG

Step 7-3c

RIGHT

Flared Top

Step 7-3a

Blade Removal:

1. Cover the blade iron posts with a protective cloth to prevent scratching

the blades.

2. Using pliers, loosen the blade iron posts by turning them counterclockwise.

Once they are loosened, nish unscrewing them by hand until they are

completely separated from the blade iron.

3. Carefully remove the blade.

Note: e blades on this

fan have been treated

with Hunter’s Dust Armor

protection, making the blades

less likely to attract dust and

dirt. Use a dry or slightly damp

lint free cloth to clean the

blades. Do not use a furniture

polish or any other cleaners

that leave any residue, as they

will damage the protective

Dust Armor on the blades.

42487-01 • 01/03/12 • Hunter Fan Company