SDS

Shell Hydraulic S1 M 32
Version 1.0
Effective Date 24.08.2010
Safety Data Sheet
6/8
Print Date 27.08.2010 MSDS_TW
10. STABILITY AND REACTIVITY
Chemical Stability
: Stable.
Possibility of Hazardous
Reactions
: Data not available
Conditions to Avoid
: Extremes of temperature and direct sunlight.
Incompatible Materials
: Strong oxidising agents.
Hazardous
Decomposition Products
: Hazardous decomposition products are not expected to form
during normal storage.
11. TOXICOLOGICAL INFORMATION
Basis for Assessment
: Information given is based on data on the components and the
toxicology of similar products.
Likely Routes of
Exposure
: Skin and eye contact are the primary routes of exposure
although exposure may occur following accidental ingestion.
Acute Oral Toxicity
: Expected to be of low toxicity: LD50 > 5000 mg/kg , Rat
Acute Dermal Toxicity
: Expected to be of low toxicity: LD50 > 5000 mg/kg , Rabbit
Acute Inhalation Toxicity
: Not considered to be an inhalation hazard under normal
conditions of use.
Skin Corrosion/Irritation
: Expected to be slightly irritating. Prolonged or repeated skin
contact without proper cleaning can clog the pores of the skin
resulting in disorders such as oil acne/folliculitis.
Serious Eye
Damage/Irritation
: Expected to be slightly irritating.
Respiratory Irritation
: Inhalation of vapours or mists may cause irritation.
Respiratory or Skin
Sensitisation
: Not expected to be a skin sensitiser.
Repeated Dose Toxicity
: Not expected to be a hazard.
Aspiration Hazard
: Not considered an aspiration hazard.
Germ Cell Mutagenicity
: Not considered a mutagenic hazard.
Carcinogenicity
: Product contains mineral oils of types shown to be non-
carcinogenic in animal skin-painting studies. Highly refined
mineral oils are not classified as carcinogenic by the
International Agency for Research on Cancer (IARC). Other
components are not known to be associated with carcinogenic
effects.
Reproductive and
Developmental Toxicity
: Not expected to be a hazard.
Additional Information
: Used oils may contain harmful impurities that have
accumulated during use. The concentration of such impurities
will depend on use and they may present risks to health and
the environment on disposal. ALL used oil should be handled
Artisan Industrial Co., Ltd.
Confidential Document