SDS

Shell Hydraulic S1 M 32
Version 1.0
Effective Date 24.08.2010
Safety Data Sheet
3/8
Print Date 27.08.2010 MSDS_TW
compounds.
Suitable Extinguishing
Media
: Foam, water spray or fog. Dry chemical powder, carbon
dioxide, sand or earth may be used for small fires only.
Unsuitable Extinguishing
Media
: Do not use water in a jet.
Protective Equipment &
Precautions for Fire
Fighters
: Proper protective equipment including breathing apparatus
must be worn when approaching a fire in a confined space.
6. ACCIDENTAL RELEASE MEASURES
Avoid contact with spilled or released material. For guidance on selection of personal protective
equipment see Chapter 8 of this Material Safety Data Sheet. See Chapter 13 for information on
disposal. Observe the relevant local and international regulations.
Personal Precautions,
Protective Equipment and
Emergency Procedures
: Avoid contact with skin and eyes.
Environmental
Precautions
: Use appropriate containment to avoid environmental
contamination. Prevent from spreading or entering drains,
ditches or rivers by using sand, earth, or other appropriate
barriers.
Methods and Material for
Containment and Clean
Up
: Slippery when spilt. Avoid accidents, clean up immediately.
Prevent from spreading by making a barrier with sand, earth or
other containment material. Reclaim liquid directly or in an
absorbent. Soak up residue with an absorbent such as clay,
sand or other suitable material and dispose of properly.
Additional Advice
: Local authorities should be advised if significant spillages
cannot be contained.
7. HANDLING AND STORAGE
General Precautions
: Use local exhaust ventilation if there is risk of inhalation of
vapours, mists or aerosols. Properly dispose of any
contaminated rags or cleaning materials in order to prevent
fires. Use the information in this data sheet as input to a risk
assessment of local circumstances to help determine
appropriate controls for safe handling, storage and disposal of
this material.
Precautions for Safe
Handling
: Avoid prolonged or repeated contact with skin. Avoid inhaling
vapour and/or mists. When handling product in drums, safety
footwear should be worn and proper handling equipment
should be used.
Conditions for Safe
Storage
: Keep container tightly closed and in a cool, well-ventilated
place. Use properly labelled and closeable containers. Storage
Temperature: 0 - 50 °C / 32 - 122 °F
Recommended Materials
: For containers or container linings, use mild steel or high
density polyethylene.
Unsuitable Materials
: PVC.
Other Advice
: Polyethylene containers should not be exposed to high
Artisan Industrial Co., Ltd.
Confidential Document