Installation guide

21
45072-01 • 10/21/10 • Hunter Fan Company
21
Removing the Light Fixture
10.6
Install the switch housing cap (255) and screws (245) to the lower switch
housing.
Removing the Light Fixture
10.4
10.5
Install the dummy terminals (included in the sack parts) on the two
disconnected wires in the lower switch housing.
Removing the Light Fixture
10.3
Remove the light xture (49) from the lower switch housing (28). Pull the
large (male) plug connector through the hole in the center of the lower
switch housing. en, pull out the small (female) connector.
10 • Removing the Light Fixture
Connect the upper plug connector from the motor to the lower plug
connector in the lower switch housing (28). Attach the lower switch
housing to the upper switch housing with three housing assembly screws.
28
255
245
49
28