Installation guide

15
45072-01 • 10/21/10 • Hunter Fan Company
15
7 • Assembling the Blades
Attach each blade (46) to a blade iron (44) using three blade assembly
screws (67). e blades may appear slightly loose after screws are
tightened. is is normal.
Squeeze the rubber blade grommets (66) into the holes in the blades (46).
66
67
44
46
46
7.1 7.2
44
47
47
7.47.3
Remove the blade iron armature screws (47) and rubber shipping bumpers
from the motor.
For each blade, insert one blade iron armature screw (47) through the
blade iron (44), and attach lightly to the fan. Insert the second blade iron
armature screw, then securely tighten both blade iron armature screws as
tightly as possible with a screwdriver.