SINCE 1886 R SAFE USE AND CARE GUIDELINES KARRINGTON USB TABLE LAMP-#MMM248M
Thank you for your purchase. WARNING - SHADE SIZING TM All Showcase Collection Lamp and Shade packages are Color and Letter Coded to indicate safety and appearance matched combinations. To reduce risk of fire or tip over, use only these combinations and do not exceed recommended maximum wattage. When not purchasing in recommended combinations, you must match bulb and lamp wattage to the size of shade you would like to use. Step 1 - Choose bulb wattage. Do not exceed socket label rating.
1. Remove protective harp □ Remove the protective harp form the harp holder by squeezing legs of the protective harp. 2. Assembling harp and shade □ Squeeze legs of the harp together and insert the two ends between the prongs of the harp holder. □ Place the shade (sold separately) onto harp and secure with finial.
2. Installing the bulb □ Prior to installing the bulb, inspect socket for silica packet. If packet is present, then remove and throw away. Do not expose it to children or pets. □ Install the 120V, 60HZ, 100-Watt max. medium-base type A 3-way bulb (not included) into the socket of the light lamp. NOTES: Make sure a 3-way bulb is being used and that the bulb is fully screwed into the base of the socket. this may require an extra turn of the bulb. □ Plug cord into an outlet and turn on at the switch.
