SINCE 1886 R USE AND CARE GUIDE ZEBADEE LED PENDANT -#M99272
TOOLS REQUIRED Safety goggles Phillips screwdriver Flathead screwdriver Wire strippers Wire cutters Ladder Pliers Electrical tape HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Installation instructions 1. Adjust the fixture height 1. Installing the mounting plate □ Determine the length of cord and support wires required to hang the fixture at the desired height. □ Adjust the length of cord and support wires as desired by pushing or pulling the cord and support wires when pressing the knobs. □ Tuck the excess cord and support wires, and then hide the excess cord and support wires in canopy. CAUTION: Ensure the power is off at the main fuse box prior to beginning installation .
Installation instructions (continued) 3. Installing the fixture 2. Connecting the wires □ Install the fixture bare copper wire (1) under the ground screw (EE) on the mounting plate (BB). □ Push all excess wires into the outlet box. □ Raise the fixture to the ceiling and secure the canopy in place with two finials (GG). □ Connect the fixture bare copper wire (1) to the green (or bare, or green & yellow) supply ground wire (2) in the outlet box using a wire nut (AA).
