SINCE 1886 R USE AND CARE GUIDE CORY 1 LIGHT SCONCE -#M99219
TOOLS REQUIRED Safety goggles Phillips screwdriver Flathead screwdriver Wire strippers Wire cutters Ladder Pliers Electrical tape NOTE: This item requires the use of one 120V, 60Hz, 60-Watt antique bulb (included) or one 120V, 60Hz, 60-Watt max, medium-base type A bulb (not included). Do not exceed the recommended wattage. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Installation instructions 1. Installing the mounting plate CAUTION: Ensure the power is off at the main fuse box prior to beginning installation . □ Turn off the switch at the wall. □ Turn the power off at the main fuse box. □ Attach the mounting plate (BB) to the outlet box using the outlet box screws (CC). (Important note: make sure one of the mounting hole in the mounting plate is facing right.) 2.
Installation instructions (continued) 3. Hanging the fixture body □ Raise fixture body (A) to the wall and carefully tuck the wires inside the outlet box. spread the electrical splices so that the black wires are on one side of the outlet box and the white wires are on the other side. line up the holes in backplate with holes in mounting plate and secure with two small screws (DD). (Important note: This sconce can be mounted up or down, make sure mount the fixture body (A) to wall as you desired).
